Semi-flexible, very slow curing flange sealant used for machined, rigid metal flanges.
LOCTITE® 128068 is a 1-part, ready-to-use, gel-like anaerobic flange sealant that cures at room temperature when it is isolated from air contact. It is designed to cure slowly to avoid shimming between flanges. It seals close fitting joints between rigid metal faces and flanges and will flex with minor flange movements. Provides resistance to low pressures immediately after assembly of flanges. Typically used as a form-in-place gasket for transmission housings and axle covers.
- Very slow curing
- Semi-flexible
- Fluorescent for quality control
- Medium strength
| Chemical Basis / Base | Methacrylate |
| Color | Purple |
| Fixture Time Max | 3 |
| Fixture Time Min | 1 |
| Fixture Time Unit | hr. |
| Substrates | Metal: Aluminum, Metal: Steel - Stainless Steel |
| Tensile Shear Strength | 6 N/mm² |
| Viscosity Max | 1000000 |
| Viscosity Min | 300000 |
| Viscosity Unit | mPa.s (cP) Brookfield |
Speciaal besteld artikel en kan derhalve niet geretourneerd worden.
